RUIMA Trimming Margin Machine and surface planer wood machinery

1,Excellent stepless speed regulating 2, It can clean the edge of the wood very well, 3,Easy to operation and safely.

1.Introduction

1*Trimming margin machine is widely use on the wooden material process and laminted wood, Special  for the timber slitting or burst. 

2*It is sectional type for the working table, customer can adjust the width according to the needs.

3* its easy to control and high efficiency.

4* Checking by infrared ray, Rubber roller chain for feeding (for different wood)

2.Technical Parameter

Trimming Margin Machine
Specifications	MJ-4003		MJ-4003N		MJ-4005
Min. working width	30mm		30mm		30mm
Max. working width	400mm		400mm		400mm
Min. working length	300mm		300mm		300mm
Max. working length	2000mm		2000mm		2000mm
Min. working height	8mm		6mm		8mm
Max. working height	30mm		30mm		50mm
Feeding power	0.375kw		0.375kw		0.375kw
spindle power	5.5kw		5.5kw		7.5kw
Total power	5.875kw(7.9HP)		5.875kw(7.9HP)		7.875kw(7.9HP)
Speed control	9m/minute		6m/minute		3.6m/minute
Dimension	750*850*650mm		750*850*650mm		750*850*650mm
Saw blade	180*2.4*20T*35H		185*2.6k*22T*35H		190*2.6K*24T*35H
Net weight	200kg		200kg		250kg

3. Application

This machine is widely use on the wooden material process and laminted wood,special for the timber slitting or burst.

It is sectional type for the working table,customer can adjust the width according to the needs,its easy to control and high efficiency,Checking by infrared ray, rubber roller chain for feeding(for different wood)

4.Working picture

Feeding and outing system

Steel wheel feeding (full active)  low wood waste.

laser  infrared calibration

 

cutting system

Feeding:  adjust the speed,  wood size initiatively,

 change feed speed,  protect saw blade and motor

 5.Auxiliary Assembly

1,Bearing: Adopt the famous international brand, Clean heating assembly.Main spindle with high flexible degree and long life.

2,Saw blade: Use the high quality import saw blades, heat-resisting,wear-resisting,never deformation.

3,Switch: Intelligent operation interface,easy to operation.

Cutting Solution Project

We provide solutions project for Log cutting, As the picture show below, we provide a log cutting into slats solutions project.

 

A: Log Multi-rip Saw Machine  B: Working Table

C: Plank Multi Saw Machine     D: Clear Margin Saw Machine

 

6.Factory & Company  picture

 

 

 

RUIMA Trimming Margin Machine and surface planer wood machinery